Lithium-ion batteries attract all the headlines, but the humble lead-acid type still has an important role to play today… and tomorrow.

Two thousand. According to Kelvin Naidoo, group technical executive at AutoX, that’s how many times a vehicle engine is started every minute in South Africa. Considering that AutoX occupies roughly a third of the market share, it means 667 starts per minute happen using Sabat or Willard batteries manufactured at its Port Elizabeth battery-manufacturing plant. We paid AutoX a visit to talk to the experts and learn how a vehicle’s starter battery is made.

Lifecycle testing

In order to validate the durability of a battery, AutoX conducts its own lifecycle testing. Although there are many test protocols, the most popular is a 17,5 percent-state-of-charge drainage and charging cycle test, which is an accelerated-durability procedure. The battery is placed in a water bath at 60° C to simulate average under-bonnet temperatures and endures 18 discharge and charge cycles a day. A battery that was on test when we visited managed 1 400 cycles (two and a half months of testing), which is well above the target of 800 cycles.

Step 1 - It’s all about the lead

Lead is the most important component of a traditional car battery and commands a price of R30 000 a tonne when bought in bulk. Interestingly, around 98 percent of a lead-acid battery is recyclable (lithium-ion experiences wide-ranging recycling issues), including lead alloys. The latter component arrives at the AutoX manufacturing plant in raw bars and the next step is to create lead components.

Lead-oxide paste

The first step to form this active battery material is to convert bulk lead to fine lead-oxide powder in an oxide mill. The process involves melting bulk lead at close to 400°C (a different method to the popular lead-ball mill) before spinning the molten material and introducing air to start the oxidation process. Fine lead particles are removed by what is called a cyclone and this powder is allowed to cool before being stored in bulk and used as main ingredient in the oxide paste.

The process of creating the paste is similar to creating cake batter, as the lead-oxide powder is mixed with water, sulfuric acid and other additives to create the paste. As the recipe for the positive and negative paste differs, the end result has a colour difference, too.

Positive and negative plates

The battery consists of multiple positive (cathode) and negative (anode) plate pairs. They’re created by melting specific bulk lead alloys for each application before allowing the molten metal to flow over a water-cooled, spinning drum to create 1 mm thick metal strips. These strips are controlled to a fine tolerance and gathered in rolls weighing around 800 kg.

The rolls are transported to the next station, where they’re transformed into metal grids by cutting the patterns and stretching the strips until they resemble a mesh. Now the lead-oxide paste is applied before the strip is cut into the correct-size plates.

These plates run through an oven to be dried in order to protect their integrity. Final curing happens in dedicated ovens for up to 48 hours, under strictly controlled conditions regulating temperature (60°C) and humidity (45 percent).

There are quality-control procedures in place at every step to catch potential defects early and ensure perfect components reach the assembly phase.

Battery basics

Battery capacity in ampere hour (Ah) is usually rated at 20 hours (20HR), which is the maximum current capacity that can be withdrawn from a battery in a 20-hour period before the voltage drops to below 10,5 V (which is close to the depleted state). Therefore, a 50 Ah (20HR) battery (the normal size for a midsize hatch with a petrol engine) can supply 2,5 A (50/20) for 20 hours. Peukert’s Law says the total capacity of a battery is inversely proportional to the current drawn. This means that, if a large current is drawn, the total capacity is less than when a small current is drawn (therefore the 20HR rating on batteries). As a battery continuously loses charge while not in use owing to the small internal resistance, the shelf life of a new battery is limited to three months before reconditioning is needed.

According to Heine Coetzer, OEM and R&D manager at AutoX, the terms “sealed” and “maintenance-free” on modern batteries are misleading. Adding calcium did reduce the evaporation of the water in the electrolyte considerably so that modern batteries no longer need to be topped up with distilled water. It is, however, still important to keep the battery dry and clean, especially between the terminals, as any current which is able to flow will drain and even damage the battery.

Sealed implies the battery casing is completely closed. This is not true, as a valve prevents the build-up of gases which can lead to an explosion if not allowed to vent into the atmosphere.

Step 2 - The assembly phase

The first clear indication we were indeed in a battery plant was when I spotted square plastic (polyethylene) battery casings arriving from an external supplier. These casings are divided into six compartments that eventually form the six cells of the battery.

Plates are loaded in positive and negative pairs with a separator material preventing a short circuit. The main terminal connectors, as well as the interconnectors between the cells, are added. These interconnecting terminals are welded together before glue is added on top of the plates to prevent relative cell movement (once cured) when the battery is subjected to shock loading, for example, when a vehicle traverses bumpy terrain.

Each cell produces roughly 2,1 V and the six interconnected cells are in series, resulting in a total voltage of around 12,7 V when fully charged. The lid of the battery is securely fixed by heating the mating surfaces to the point that plastic welding occurs when they meet. The seal is later tested by pressurising the casing (3,5-bar air pressure) and monitoring for any leaks.

The battery terminals are finished in a visually exciting process called “post burn”. Extra lead material is added to the blazing flames to form the end product. A code is engraved into the casing to state the date and production line on which the battery was produced in order to provide complete traceability of the product throughout its service life. The battery is now almost complete, although it is still unable to produce electrical power because no electrolyte (diluted sulfuric acid; H2SO4) has been added.

Step 3 - Powering up

The first charging/conditioning phase is extremely important because it affects the durability of a brand-new battery and therefore happens in the manufacturing plant. A highly diluted electrolyte (sulfuric acid) is added before the batteries are charged for 28 hours under controlled conditions. This process is closely monitored to ensure all batteries are conditioned before the next step, where draining of the diluted electrolyte takes place and standard electrolyte solution is added before sealing of the battery. Lastly, stickers and information labels are pasted on and the unit is ready to leave the production facility.

EFB vs. AGM lead-acid technology

The two main lead-acid technologies for car batteries are an enhanced flooded battery (EFB) and absorbed glass matte (AGM) version. As the name suggests, the EFB type uses a liquid electrolyte in the form of diluted sulfuric acid. The AGM also employs sulfuric acid but it is absorbed in the fibreglass matte separator with no free electrolyte sloshing about.

When stop/start engine technology became the norm, EFBs of the time were not able to cope with the high frequency of power demands and failed prematurely. The AGM technology is able to handle the elevated demands and, although almost three times as expensive, became popular with German manufacturers. According to Naidoo, this trend is reversing as modern and improved EFB batteries are perfectly capable of handling stop/start needs.

A warning: know what type of battery is recommended for your vehicle, as replacing the battery with the incorrect type can have a detrimental effect on the battery life and even charging control electronics. The reason is the two types of batteries run at slightly different voltages, which may confuse the software-charging algorithms if the wrong unit is fitted. 

Original article from Car